Rotocut Sheeters
Rotocut HS Sheeter
The Rotocut HS made its debut at the international exhibition in Dusseldorf, Germany Drupa 2000.
A speed of 70,000 impressions per hour was demonstrated with consistency and accuracy, and constantly runs at a maximum speed of 12.25 m/s.
The Rotocut HS is servo driven incorporating its own print-to-cut register system.
Pile changes are also completed with ease using its pile interrupt automatic roller table, which ultimately minimizes waste during these pile changes at full press speed.
The field of application includes:
- High range of speed of the printing presses up to 12.25 m/s
- Flat sheet delivery
- Folded products
- Direct drive by servomotor
- Automatic cut-off control
- Remote diagnosis via modem
This system designed for long run high-speed sheeter production has been welcomed by the largest of sheeter users worldwide.
Rotocut Comparison Chart
Linear Press Speed & Copies per hour (cph)
| TYPE: Cut-Off | S | HS | |
| MM | INCHES | CPH | CPH |
| 630 | 24.80 | 52.000 | 70.000 |
| 620 | 24.41 | 52.840 | 71.000 |
| 598 | 23.54 | 54.780 | 73.700 |
| 578 | 22.76 | 56.680 | 75.000 |
| 546 | 21.50 | 60.000 | 75.000 |
| 452 | 18.80 | 65.000 | 75.000 |
Rotocut S Sheeter
The Rotocut S has been proven time and time again as the most productive sheeter in the world.
The Rotocut S is destined to run in line with a web offset printing machine and to cut a web (folded or unfolded) into sheets and to collect the (unfolded) sheets in a pile.
This sheeter enables the delivery of cut sheets at maximum printing speed of 9.1 m/s. The sheets are then delivered in a closely shingled form, i.e. very slowly, which allow sample sheets to be removed quite easily.
Its vacuum delivery system and air flotation principals deliver cut sheets without any marking and distribute them into a brick like pile throughout every press run.
The Rotocut S is equipped with two (2) variably speed driven infeed rollers with four (4) air loaded nip wheels each and a manual linear compensator and the top mounted cutter head is equipped with either one (1) or two (2) embedded hardened knives.
The running speeds of the Rotocut S are consistent with most press lines and it eliminates the need to slow the press to satisfy the sheeter in almost every case."
As you can see, this model of the Rotocut offers.